Home / Products / TCB50 / TCB504
PRODUCTS WITH TEHCO QUALITY
Products

TCB504 Solid Lubricating Bearing with Copper Base

TCB504 Solid Lubricating Bearing with Copper Base
TCB504 Solid Lubricating Bearing is produced by strengthening brass that has good physical performance and good capability for casting. The surface is regularly and finely machined with sockets in which particular solid lubricant is filled. Its material is CuSn5Pb5Zn5. The material of copper alloy could be changed as per customer’s requirements. These products are widely used on consecutive casting and rolling machines, mine-exploiting equipments, ships, steam engine, etc.

Technical Data

Performance Index Data
Material CuSn5Pb5Zn5
Density g/cm? 8.7
Hardness HB >70
Tensile strength N/mm? >240
Yeild strength N/mm? >100
Elongation % >10
Coefficient of linear expansion 10-5/℃ 1.8
Heat-conducting Coefficient W(/m.k) 46~63
Flexibility Coefficient KN/mm? 85~115
Temp. Limits ℃ -40~+250
Max. Dynamic Load N/mm? 60
Max.speed m/s Dry Lubrication 0.25
Oil Lubrication 0.85
Max.PV
N/mm?*m/s
Dry Lubrication 1.0
Oil Lubrication 2.45
Friction Dry Lubrication 0.12~0.16
Oil Lubrication 0.03~0.08
In addition to the standard product catalog is displayed, we provide non-standard product or to order according to customer requirements.

TCB50 Classification

TCB 500

TCB500 Solid Lubricating Bearing is produced by strengthening brass that has good physical performance and good capability for casting. What's more, the brass material has pretty good anti-erosion ability in air, fresh water and sea water. The surface is regularly...

TCB 503

TCB503 Solid Lubricating Bearing is produced by strengthening brass that has good physical performance and good capability for casting. The surface is regularly and finely machined with sockets in which particular solid lubricant is filled. Its material is CuAl10Ni5Fe4...

TCB 504

TCB504 Solid Lubricating Bearing is produced by strengthening brass that has good physical performance and good capability for casting. The surface is regularly and finely machined with sockets in which particular solid lubricant is filled. Its material is CuSn5Pb5Zn5...

TCB 505

TCB505 Solid Lubricating Bearing is produced by strengthening brass that has good physical performance and good capability for casting. The surface is regularly and finely machined with sockets in which particular solid lubricant is filled. Its material is CuSn12...

TCB 506

It is based on cast iron. The solid lubricant is inlayed by certain angle, density and special formula, and then is processed exactly. It is economical product meeting the using requirements. The product is applied to automobile die and injection moulding.

TCB 507

The basement of this product is 45# steel. The surface is inlayed the special solid lubricant by certain angle and density. The product has high compression resistance, and is mainly used in automobile die.

TCB 508

It?is based on the squeeze casting zinc base alloy of high strength, punched with orderly and proper size holes in the base, and then embedded oil graphite, or MoS2, or PTFE + graphite +paraffin wax particles as the solid lubrication material. Because its proportion...

Home About Products Size Application Design Download Contact News FAQ More Products